2008-19 Subaru WRX/STI/BRZ Rear Endlinks
Sway-A-Way’s 2008-19 Subaru WRX/STI/BRZ Front Endlinks are designed to replace your weak factory endlinks prone to failure when used with a stiffer sway bar. Factory endlinks are designed to be used with specifically the factory diameter sway bar. When you upgrade your sway bar to a larger diameter bar, you are vastly increasing the amount of force your endlinks will need to withstand. Sway-A-Way’s part number 4-201 are designed to replace the 2008-2017 Subaru WRX, STI & BRZ rear Endlinks with a much stronger endlink able to pair with virtually any size sway bar in any driving setting. We accomplish this by machining our 4-201 out of solid billet 6061-T6 aluminum and plating it for a stylish and corrosion resistant finish.
A large advantage of the Sway-A-Way 4-201 endlinks is their massive COM10T spherical bearings. Spherical bearings allow for high articulation angles while retaining a solid connection between your sway bar and suspension. Teflon lining and properly machined spacers make for a precision fit eliminating the worry of accelerated wear, clunking, and additional noise. A common concern of spherical bearings endlinks is clunking and excessive NVH. This misdirected concern is the product of poor endlink designs and incorrect installation. The spherical bearings found in the Sway-A-Way PN #4-200 & #4-201 are the same ones employed in our off-road offerings and should not need to be replaced. In the event the spherical bearings do wear, you can find affordable endlink rebuild kits available directly from Sway-A-Way. Tying the entire package together are grade 8 bolts secured with stover nuts, capable of withstanding severe vibration and shock loads. Install and forget it, no more NVH caused by loosened hardware.
Note: Sway-A-Way’s 2008-2019 Subaru WRX/STI/BRZ Rear endlinks should work with any aftermarket control arms, as long as they accept the OEM endlink.