Wheel Stud – 14mm x 1.5 – Bullet Nose
Sway-A-Way’s Wheel studs are high-quality studs manufactured out of heat-treated medium carbon alloy steel. All Sway-A-Way wheel studs are cold-headed and thread rolled for an entirely cold formed stud that meets or exceeds SAE Grade 8 bolt standards. Cold formed studs have an uninterrupted grain flow, meaning the grain lines of the steel are compacted to follow the geometry of the stud. This results in a strength advantage over machined studs. They are then heat treated and finished with a Black Zinc finish.
Sway-A-Way’s Bullet Nose wheel studs are the same Sway-A-Way Wheel studs but with a CNC machined bullet nose. Sway-A-Way bullet nose studs have an unthreaded bullet nose that will help with faster lug nut installation. Available in many popular lengths from 45 mm to 80 mm.
These studs press into the drum or hub. Installation requires a hole drilled and reamed to .562” diameter. The area where the stud head sits should be spot faced to 13/16″ diameter so that the seat is flat and perpinducular to the stud.
Sway-A-Way Volkswagen/Porsche/Off Road Wheel Stud Chart
|8030||STUD, 14MM X 1.5 X 36MM LONG, WITH STARTER LEAD|
|8040||STUD, 14MM X 1.5 X 45MM LONG, WITH STARTER LEAD|
|8049S||STUD, 14MM X 1.5 X 49MM LONG, BULLET NOSE|
|8052S||STUD, 14MM X 1.5 X 52MM LONG, BULLET NOSE|
|8054S||STUD, 14MM X 1.5 X 54MM LONG, BULLET NOSE|
|8056S||STUD, 14MM X 1.5 X 56MM LONG, BULLET NOSE|
|8065S||STUD, 14MM X 1.5 X 65MM LONG, BULLET NOSE|
|8072S||STUD, 14MM X 1.5 X 72MM LONG, BULLET NOSE|
|8080S||STUD, 14MM X 1.5 X 80MM LONG, BULLET NOSE|
|8050||NUT, 14MM X 1.5, BALL SEAT|